Lube Oil Cooler 2LQF1W cooler High efficiency cooler Heat exchanger Tubular cooler Cooler
Product Introduction
The heat transfer tube of tubular cooler adopts copper tube to roll out radiating fins, which has large heat exchange area, small product volume and light weight. The oil cooler is applicable to the cooling of low viscosity and cleaner oil; Tubular cooler can be used in plastic machinery, hydraulic equipment, air compressor, thin oil lubrication system, hydraulic coupling, power equipment and other industries. This series of oil cooler products can be designed and manufactured according to customer requirements from small to medium to large, covering a wide range.
Working principle of cooler
Manual operation process: after the water filter is connected to the pipeline system, the water enters the water filter from the lower water inlet. When the impurities in the water pass through the mesh core, because the volume is larger than the mesh core hole, and the vent is trapped on the mesh core, when it accumulates to a certain amount, it will cause a certain pressure difference at the water inlet and outlet. (The filter screen precision diameter is different, and the pressure difference is generally 0.15Mpa). Manually open the blowdown valve, start the blowdown, turn the handle, and the direction of rotation can be clockwise or anticlockwise. Turn the handle every 10-30 seconds, and the handle points to each concave and is fixed. The water flow backwashes the impurities and dirt attached to the inner wall of the mesh core. Close the blow down valve until it is rotated for one circle and manual blow down is completed.
Parameters
| type | Oil Cooler |
| model | 2LQF1W |
| power | 35(KW) |
| temperature range | 0-220 |
| Overall dimensions | 2600*400*200(mm) |
| weight | 400(kg) |
| purpose | Cooling |
| structural style | vertical |
