LBZ-125 Vertical Lube Oil Pump CB3-125 0.63Mpa Y112M-4-B5
Company Overview
The company is a manufacturer specializing in the manufacture of lubricating hydraulic equipment. It is a member of the Lubricating Hydraulic Professional of the China Metallurgical Rolling Association. It has produced lubricating hydraulic equipment for more than 30 years. It has strong technical force and high professional level. Centrifugal separation equipment) supporting lubrication equipment products.
Parameters:
| Model | Nominal pressure MPa | Gear Pumps | Motor | Weight kg | |||
| Type | Flow L/min | suction height mm | Type | Power | |||
| LBZ-16 | 0.63 | CB3-16 | 16 | 500 | Y90S-4-B5 | 1.1 | 42 |
| LBZ-25 | CB3-25 | 25 | 43 | ||||
| LBZ-40 | CB3-40 | 40 | Y100Li-4-Bs | 2.2 | 65 | ||
| LBZ-63 | CB3-63 | 63 | 67 | ||||
| LBZ-100 | CB3-100 | 100 | Y112M-4-B5 | 4 | 99 | ||
| LBZ-125 | CB3-125 | 125 | 100 | ||||
Instructions
1. According to the oil inlet and outlet marked on the gear oil pump body, it should be correctly connected to the pipeline to be connected.
2. The wiring of the motor should be carried out in accordance with the rotation direction indicated on the rotation direction sign on the fan blade cover of the motor, and the reverse rotation is not allowed, otherwise it will not match the function of the oil inlet and outlet piping.
3. Industrial lubricating oil or hydraulic oil without corrosion and impurities and within the specified medium viscosity range should be used according to regulations.
4. Pay attention to the protection of the motor when using it in the open air or in a relatively humid environment.
5. It is strictly forbidden to disassemble without permission. When it is necessary to maintain and adjust, it should be noted that the connection between the oil pump and the motor must be tightened in place to ensure that the coaxiality is required to avoid vibration and noise or abnormal phenomena caused by different axes.
Operation and Maintenance
Vertical gear pumps are often installed in ships and oil stations. When it is used in thin oil stations, extra attention should be paid. Thin oil is gasoline, diesel, light oil, flammable and explosive places, first of all, pay attention to reliability, and also pay attention to the selection, the following is the experience of Zcer lubrication equipment to share the application of vertical gear pumps in thin oil stations Matters needing attention:
1. Pay attention to the flow rate and outlet pressure when selecting the type, and leave a margin. Thin oil has low viscosity. When transported by a vertical gear pump, there will be internal leakage, and the flow will lose about 20%. Therefore, the flow rate when selecting the type should be greater than the user's demand flow, and the same is true for the pressure.
2. Prepare wearing parts. Due to the low viscosity of the thin oil, after a period of continuous use of the vertical gear pump, gears, bearing sleeves, and composite sleeves may be worn out, so prepare such vulnerable parts, and consider replacing spare parts when there is a serious loss of flow and pressure .
3. The inlet pipeline should be set as simple as possible. The pipeline of the thin oil station is relatively complicated. The resistance of the inlet pipeline of the vertical gear pump should be as small as possible, and the number of elbows should be less. Otherwise, the pump flow rate will decrease or the oil will not be supplied.
The electrical selection is flameproof. Open flames or sparks are prohibited at the thin oil station, and the vertical gear pump is equipped with a flameproof and energy-saving motor. The gears of the pump's flow-passing parts are made of copper gears.
