LBZ-150 GDR Type Double High Pressure Lube Oil Station GDR-B2.5/150 1450 R/Min 5.5KW
Company Overview
The company is a manufacturer specializing in the manufacture of lubricating hydraulic equipment. It is a member of the Lubricating Hydraulic Professional of the China Metallurgical Rolling Association. It has produced lubricating hydraulic equipment for more than 30 years. It has strong technical force and high professional level. Centrifugal separation equipment) supporting lubrication equipment products.
The products are designed and manufactured according to the lubrication industry standard and the API614 standard of the Petroleum Institute, especially the design and manufacture of non-standard products have strong advantages, such as: the internal circulation device of the generator set introduced by foreign technology in Chongqing Water Wheel Plant, which is changed by our company to the external circulation The lubricating device solves the problem of imported technology and is well used by users; the supporting thin oil lubricating device for the refrigeration station of the Shanxi Lu'an coal-to-oil demonstration project is designed, manufactured and inspected according to the API614 standard of the Petroleum Institute; the centrifuge series hydraulic station of Jiangbei Machinery Factory, All of them are transformed and matched, with an annual supply of about 100 sets; Zhongtong Group and Chongqing Sailimeng Motor have provided long-term support for thin oil stations and exported them abroad; Chongqing Iron and Steel, Panzhihua Iron and Steel, Cheng Seamless, Shougang, and Bayi Steel Plant, etc., the products All over the country; product quality and after-sales service have reached the praise of users.
Product Paramerters
| Parameters | Type | GDR-B2.5/16 | GDR-B2.5/25 | GDR-B2.5/40 | GDR-B2.5/63 | GDR-B2.5/100 | GDR-B2.5/125 | |
| low pressure system | Pump unit model | LBZ-16 | LBZ-25 | LBZ-40 | LBZ-63 | LBZ-100 | LBZ-125 | |
| Flow | 16L/min | 25L/min | 40L/min | 63L/min | 100L/min | 125L/min | ||
| Oil supply pressure | ≤0.4 MPa | |||||||
| Oil supply temperature | 40±3℃ | |||||||
| Motor | Model | Y90S-4,V1 | Y100S-4,V1 | Y112S-4,V1 | ||||
| Power | 1.5 KW | 2.2 KW | 4 KW | |||||
| Speed | 1450 r/min | 1450 r/min | 1450 r/min | |||||
| Fuel tank capacity m3 | 0.93 | 1.25 | 1.7 | |||||
| High pressure system | Pump unit model | 2.5MCY14-1B | ||||||
| Flow | 2.5 L/min | |||||||
| Oil supply pressure | 31.5 MPa | |||||||
| Motor | Model | Y112M-6 B35 | ||||||
| Power | 2.2 Kw | |||||||
| Speed | 940 r/min | |||||||
| Filtration accuracy m2 | 0.08~0.12 | |||||||
| Filter oil volume m3/h | 5 | 8 | 12 | |||||
| Cooling Area m2 | 2 | 5 | 7 | |||||
| Electric heating power Kw | 3 x 1 | 3 x 2 | 3 x 2 | |||||
| Dimension (mm) | 1560*1000*550 | 1750*1100*600 | 1800*1200*800 | |||||
How do we reduce lubrication equipment failures
1. Rail
In order to lubricate the guide rail well, ensure the machining accuracy of the guide rail and the contact area of the static guide rail, correctly select the shape and size of the lubrication groove, consider the load, movement speed, rail placement method, etc., and properly place the applicable rail oil.
2. Gear
Ordinary gears are characterized by high contact stress and low speed, and it is difficult to form a fluid lubricating film in the meshing area. The lubrication state of the tooth side is mainly boundary lubrication and mixed lubrication, and the surface damage is mainly adhesive wear, fatigue pitting and abrasive wear.
In terms of ensuring lubrication, the lubrication equipment manufacturer said that it mainly depends on the adsorption film and reaction film formed on the tooth side. The adsorption film can reduce the friction coefficient and friction force, and the reaction film can prevent adhesion. The adsorption film and reaction film mainly depend on deep refining. Base oil and quality, appropriate amount of extreme pressure, grinding additives.
3. Rolling bearings
The correct choice of bearing type and model, consider the direction of the bearing, load characteristics and working mode during installation, and select the appropriate degree of lubricating oil to ensure the oil quality and flow of the lubricating oil, and remove mechanical impurities in the lubricating oil, according to the work Depending on the environment, the types of lubricating oils used in rolling bearings are different. The working temperature is between 50~100°C. Molybdenum disulfide lithium base grease is used.
4. Sealing device
In the contact seal, the sealing device should be kept stable, the contact friction surface forms an oil film, and the oil film is used to lubricate and seal. The micro-damage and deformation of the sealing friction surface directly affect the formation and stability of the oil film, and oil leakage causes damage and failure of the mechanism. When applying the sealing device, the characteristics of the lubricating oil, pressure, temperature, sliding speed, sealing material and suitable expansion and contraction of the lubricating oil should be fully considered.
5. Liquid level of lubricating oil
Under normal circumstances, it should be kept between the upper and lower lines of the oil mark, but it should not be too small. If it is too small, some gears and bearings will not be in contact with the lubricating oil, forming an oil film and causing dry friction. It should not be too large, otherwise the gears, bearings and other moving parts Increase the running resistance, increase the power consumption, the lubricating oil heats up due to continuous stirring, the normal lubrication state of the friction surface is damaged, and the equipment wear is intensified.
