2000L/H Wide Flow Path Plate Heat Exchanger High Viscosity
Brief Introduction
The plate heat exchanger is composed of stamped and formed concave and convex stainless steel plates. The concave-convex pattern between the two adjacent plates forms a 180-degree relative combination, so the concave-convex ridge lines between the two plates of the plate heat exchanger form staggered contact points. After the contact points are combined by vacuum welding, it forms The high-pressure staggered flow structure of the plate heat exchanger, these staggered flow structures make the cold and hot fluids in the plate heat exchanger generate strong turbulence to achieve high heat exchange effect. The plate heat exchanger is composed of a group of corrugated metal plates with four corner holes for the passage of two liquids for heat transfer.
Material and operating conditions of gasket:
| Material | Application | working temperature |
| NBR | Water, sea water, mineral oil, salt water | -15—130℃ |
| HNBR | High temperature mineral oil, high temperature water | 15—140℃ |
| EPDM/HEPDM | Water,Hot water, steam, acid, alkali,caustic | -25—150℃ |
| Viton／Fluorine Rubber | Strong acid, strong alkali, mineral oil, grease and fuel oil, etc | 5—200℃ |
| NEOPRENE | Acid, alkali, mineral oil, low molecular weight aliphatic hydrocarbon | 35—130℃ |
| Silicon Rubber | High temperature and some corrosive environments | 65—200℃ |
| material | application |
| SUS304 / SUS316L | Purified water, river water, food oil, mineral oil |
| Titanium / Pal ladium | Sea water, salt water, salinized substance |
| Hadtelloy Alloy / C-276 | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid |
| Ni / Nickel | High temperature and high concentration caustic soda |
Plate heat exchanger features
1. High efficiency and energy saving: the heat transfer coefficient is 3000-4500kcal/m2 °C h, which is 3-5 times higher than the thermal efficiency of the tubular heat exchanger, and the heat recovery rate can be as high as 90%.
2. Easy to clean and easy to disassemble and assemble: the plate heat exchanger is clamped by clamping bolts, so it is easy to disassemble and assemble, and can be opened and cleaned at any time.
3. Compact structure: The plates of the plate heat exchanger are closely arranged. Compared with other types of heat exchangers, the floor area and space occupied by the plate heat exchanger are less. 1/5 of the type heat exchanger.
4. No leakage of liquid: the sealing groove of the plate heat exchanger is equipped with a liquid discharge channel, and various media will not collude. Even if there is a leakage, the medium will always be discharged outward.
5. Strong adaptability: The plates of the plate heat exchanger are independent components, and the process can be increased or decreased at will according to the requirements, with various forms; it can be applied to various process requirements.
6. Long service life: The plate heat exchanger is pressed by stainless steel or titanium alloy plates, which can withstand various corrosive media. The rubber pad can be replaced at will, and it can be easily disassembled and repaired.
FAQ
Q: What about the warranty?
A: We provide 1 year warranty and maintenance
Q: How is the installation?
A: We provide relevant materials for installation, commissioning and training.
Q: What about the delivery time?
A: 5-10 working days for a single machine, 30-40 working days.
